lateral moving

Mainly suitable for large-scale agricultural irrigation with long strips, it has the characteristics of economy, efficiency, durability, and easy operation. The designed length of the equipment is based on the width of the cultivated land, and the equipment can move back and forth along the length direction of the cultivated land. Compared with circular sprinkler irrigation machines, there is no obvious dead angle for sprinkler irrigation, and almost 100% coverage is achieved. According to the number and model of equipment trusses, the irrigation width can reach 384m.

1. Drive Tower Wheel Frame System

The supporting crossbeam adopts four 100mm x 80mm angle steel legs, which are connected to the truss to increase structural strength and stability. All adopt Hot-dip galvanization process.

At the same time, according to the different water supply methods of users, we provide two types of forms: two rounds and four rounds.

2. Traveling tower motor

High torque motor overheat protection function, enclosed moisture-proof motor, efficient spur gear, shaft seal with specific anti fouling agent,

Model: 40:1/(0.55 kW; 0.75 kW; 0.9 kW; 1.1 kW).

3. Cross body structure - truss system

Adopting two diameters of main pipe design can widely adapt to various flow demands (50-300 cubic meters/hour), optimize and adjust low operating costs;

The uniform size of 5.85 meters for the length of a single main pipe greatly facilitates the transportation and installation of equipment.

4. Spraying system

Diversified nozzles can control the amount of irrigation water and fertilization, adapting to different plant types, climatic conditions, and growth stages.

5. Control system

Reliable furrow guiding system. Ensure that the equipment can stably and reliably walk in a straight line towards the predetermined direction.

Fixed point shutdown system. When the equipment runs to the point where it needs to replace the water hose or power supply pile wiring, it can automatically shut down and after the replacement is completed,

One click to restore the original running state and continue spraying.

Safe boundary shutdown mechanism. When the translational sprinkler runs to the edge of the boundary, the equipment will trigger the "boundary shutdown travel switch", and the equipment can automatically stop and stop the pump.

6. Advanced configuration

The rotatable translational sprinkler irrigation machine not only has the conventional translational sprinkler irrigation function, but also can rotate without water at both ends of the farmland, doubling the coverage area of the equipment,

Effectively reduce the investment cost of equipment.